Search by part number
search by category
- OR -
Depluggable Terminal Strips for Panel / Chassis Mounting
302-NSLP (-HDS) 8.00 mm (0.315 in) Spacing - 1-12 poles Print this page
- Longer Plug
- After assembly of plug and socket, wires can be made to exit on same side of terminal strips or on opposite sides
Recommended mounting hardware: M2.5 pan head screw (#3-48 pan head screw) or similar sized sheet metal screw, self-tapping screw or rivet.
Center to Center Spacing: 8.000 mm (0.315 in)
Nominal Cross Section: 1.5 mm2 (2325 mils2)
Wire Stripping Length: 5.000 mm (0.197 in)
Bill of Materials
Molding : Polyamide, UL 94, V-2
Color : Off-white
Temperature limits :
Continuous : 105°C (221°F)
Ambient Temp. Range (°C) : -40°C to 80°C
Comparative Tracking Index : CTI ≥ 600 V
Oxygen Index Rating : 25 %
Terminal Body: Nickel plated copper alloy
Plug Pin: Tin plated copper alloy
: Stainless steel strip
Screw: Yellow chromate passivated, zinc plated, steel M2.6
Whether panel, chassis, printed circuit or wire harness mounted, the 300 series terminal blocks are robust and versatile assets to complement your wiring needs. Male or female plugs can be on the wire harness or they can be on the panel, chassis or PCB. Male and female components can be adjusted for "connect ground first" type configurations where one of the components male or female is extended forward more than the other poles. Configurations with both male and female components can be designed to mate their appropriate counterparts. Plug in directions and wire entries can be oriented almost anyway possible with respect to the mounting surface. Insertion and extraction forces can be optimized for ease of use or for robustness to vibrations by utilizing different available models and sizes. All are designed to assure;od stable electrical conductivity,;od heat dissipation and repeated cycles of use. They can be specially marked to your specifications.
The screw tightened connections result in high contact forces thus promoting safe wire secureness and retention, low electrical resistance and safe reusable connections. All wire retention screws are captive in their towers and they cannot fall out during transportation, installation and use. Wire protectors are available to protect small gauge stranded wires from screw damage.
- RoHS WEEE Pb free surface compliant
TYPE (Spacing)Current (A)Voltage (V)Application
8.0 mm6300B, D26-143.5 lbfin
8.0 mm10300B, D, E26-140.4 Nm
- UL 300V / C: if mounted on a suitable insulated surface, on standoffs, or equivalent means to maintain spacing from live parts to the mounting surface. UL: Wire range is extended to 26 AWG for factory wiring. Version HDS is CSA certified for 26-14 AWG.