950-LH (-DS)

PCB Connector

Screw connection, with angled solder pin, pottable

950-LH-R.JPG

TECHNICAL DRAWINGS

950-LH.JPG - technical drawing 1

DESCRIPTION

The 950-LH series PCB screw connector with a pitch of 5 mm features an angled solder pin and is particularly suited for potting printed circuits. For such potting applications, the solder pin is sealed at the housing opening against seeping casting resin. This PCB screw connector with a pitch of 5 mm is available in 2- to 12-pole design and can be mounted side-by-side without pole loss. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. The wire entrance is parallel to the PCB whereas the casting resin surface is vertical to the wire entrance. Version 951-LH alternatively provides wire entrance vertical to the PCB.

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
02 950-LH/02 10.871.452 950-LH-DS/02 20.871.452 10.00
03 950-LH/03 10.871.453 950-LH-DS/03 20.871.453 15.00
04 950-LH/04 10.871.454 950-LH-DS/04 20.871.454 20.00
05 950-LH/05 10.871.455 950-LH-DS/05 20.871.455 25.00
06 950-LH/06 10.871.456 950-LH-DS/06 20.871.456 30.00
07 950-LH/07 10.871.457 950-LH-DS/07 20.871.457 35.00
08 950-LH/08 10.871.458 950-LH-DS/08 20.871.458 40.00
09 950-LH/09 10.871.459 950-LH-DS/09 20.871.459 45.00
10 950-LH/10 10.871.460 950-LH-DS/10 20.871.460 50.00
11 950-LH/11 10.871.461 950-LH-DS/11 20.871.461 55.00
12 950-LH/12 10.871.462 950-LH-DS/12 20.871.462 60.00
Download PDF How to Order

GENERAL INFORMATION

Pitch: 5.00 mm

No. of poles: 2 - 12

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

0.75 - 2.5 mm² / 0.75 - 2.5 mm² / 18 - 14 AWG

with wire protector:

0.34 - 2.5 mm² / 0.34 - 2.5 mm² / 22 - 14 AWG

Rated cross section: 1.5 mm²

Wire stripping length: 6 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

160 V

160 V

320 V

Rated Impulse Voltage

2.5 kV

2.5 kV

2.5 kV

Rated current: 17.5 A

Rated insulation voltage: 130 V acc. to EN 60998-1

Hole in PCB: ø 1.3 mm

Torque: 0.4 Nm

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Screw: M2.6; zinc plated steel, blue passivated

Solder pin: ø 1 mm; tin plated copper

Wire protector: Tin plated tin bronze

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
15 300 B 26 - 14 0.4
15 300 B 26 - 14 0.4
Current
[A]
Voltage
[V]
Cross Section
[mm2]
AWG
 
TORQUE
 
17.5 250 1.5

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-5,00
  • Pitch of 10 mm for larger clearance and creepage distance
  • Other solder pin length and bending positions on request