115-F-118

Plug Connector

Screw connection, with lateral ribs

https://wecoconnectors.com/wp-content/uploads/Images/115-F-118-R.JPG

DESCRIPTION

The plug connectors of this series were particularly designed for applications where space is limited. However, they offer generous terminal space despite their small dimensions. Equipped with lift-system screw terminals, this plug connector guarantees highest clamping safety over many years. Series 115-F-118 features lateral ribs on both sides, which snap-in the housing’s latching hook, thus ensuring optimum tight fit. PCBs are usually connected with the pin strips from above. Application example - thermostat housing: The plug connectors are snapped in the basic housing and their leads are wired externally. Subsequently, the control panel, equipped with corresponding pin strips, is connected from above.

GENERAL INFORMATION

Pitch: 5.00 mm

No. of poles: 2 - 12

Usable with: plugs with ø 1.3 mm pin 971-SLR series

Application: Building and telecommunication technology, particularly for mass-production applications where space is limited.

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG
0.14 - 2.5 mm² / 0.14 - 1.5 mm² / 26 - 14 AWG

Rated cross section: 1.5 mm²

Wire stripping length: 6 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

250 V

320 V

630 V

Rated Impulse Voltage

4 kV

4 kV

4 kV

Rated current: 10 A

Rated insulation voltage: 250 V acc. to EN 60998-1

Torque: 0.5 Nm

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
12 300 B 26 - 14 0.23
10 300 D 26 - 14 0.23
300 12 B 26 - 14 0.22
10 D, E 26 - 14 0.22
Download PDF

TECHNICAL DRAWINGS

115-F-118.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Nickel plated brass

Spring: Copper alloy, tin plated

Pressure clamp: Copper alloy, tin plated

Screw: M3; zinc plated steel, blue passivated

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-5,00

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF
02 115-F-118/02 10.816.052 10.00
03 115-F-118/03 10.816.053 15.00
04 115-F-118/04 10.816.054 20.00
05 115-F-118/05 10.816.055 25.00
06 115-F-118/06 10.816.056 30.00
08 115-F-118/08 10.816.058 40.00
10 115-F-118/10 10.816.060 50.00
12 115-F-118/12 10.816.062 60.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.